Bosch Flame Detector
Reliable operation, even if the lens is contaminated by a film of oil, dust, water vapor or ice MOD. 016589
IR3 Triple Infrared Flame Detector – 016589 Bosch
Flame detectors are used to detect open flames indoors or outdoors and respond to the light emitted by flames during combustion.
They are especially suitable for smokeless gas or liquid fires not detectable to the naked eye, as well as for fires of carbon-containing materials with high smoke emissions.
Typical application areas are large industrial warehouses, hangars, chemical facilities, oil refineries, engine rooms, ferries and freight ships, power plants, printing plants, lumberyards or underground tunnels.
Sensitivity according to EN 54-10 Class 1: 0.1 m² a 25 m. Low false alarm risk due to different IR wavelengths and a combination of filters and signal processing techniques.
Reliable operation, even if the lens is contaminated by a film of oil, dust, water vapor or ice. Selectable response time. Two-wire or four-wire configuration using DIP switch settings.
Flickering sunlight is avoided by a combination of filters and signal processing techniques.
Low frequency detection allows the sensor to operate even through a layer of oil, dust, water vapor or ice. Alarm transmission is done by current amplification (two cables) or the relay contact (four cables).
Can also be indicated by the integrated alarm LED.
Detector Dimensions (An. x Al. x Pr.) 108 x 142 x 82 mm .
Cable gland tickets 2 x 20 mm.
Peso2 kg
Related Products
• UL & ULC Listed
• Designed for use with all NS analog sensors
• Available in 4 and 6 inch models
• Contains a security locking tab for tamper protection
SKU: S758Category: Taktis Panels
Tags: fire alarm control panel, kentec taktis
Product Code: OTC2367
The T-6702 is a full-duplex network audio paging microphones, built-in one-way and two-way communication system. This paging microphone could be installed anywhere on the LAN system. The T-6702 network paging microphone has several paging modes include zone paging, group paging, all zone paging, two-way intercom, conference system, discussion system & voting system.
The T-6702 is built-in an LCD to display program status and its IP address, the end-user is accessible to change the IP setting with a password. It is built-in a 1W speaker with excellent sound clearance so as to ensure the communication is smooth and clear. This microphone design is adopted advanced technology to avoid echo noise and to avoid data delay as well.
65 in stock
Product Code: 0200-03460
The Hochiki SPC-24 Projected Beam Smoke Detector consists of an emitter and receiver. The SPC-24 detector should be placed so that smoke generated by a fire will likely rise into the path of the beam. The receiver is constantly monitoring and measuring the intensity of the beam transmitted by the emitter. Should the smoke from a fire cause a decrease in the signal strength of a magnitude that exceeds the programmed obscuration setting, an alarm signal is generated.
SKU: DCP-DIMMCategories: Addressable, HOCHIKI, Modules
STANDARD FEATURES
Low profile – only 2.00″ high, including base
Simple and reliable device addressing method
Uses the noise immune Digital Communication
Protocol (DCP), which utilizes interrupts for fast
response to fires
Rate of rise temperature threshold = 15°F/Min
(determined by panel)
Adjustable threshold temperature = 135°F – 190°F
(determined by panel)
UL maximum spacing of 70 feet
Model TS-0310/ TS-0310A
Microphone type Electret condenser microphone
Microphone directivity Cardioid
Frequency response 80Hz~16KHz
99 in stock
STANDARD FEATURES
L@ti-View works with L@titude, FireNET and
FireNET Plus panels.
Reports configuration mismatch errors –
ensuring that the graphics system is properly
maintained and updated whenever there are
any panel configuration revisions
Powerful event log filtering and reporting
Manage the state of the fire system using a
combination of graphical images and system
controls
Programmable macro buttons to perform panel
control operations
Full map navigation using configurable buttons
or map areas
Device analog value reporting
Perform device and zone disablements /
enablements
Operate and restore loop output devices for
testing purposes
Dual screen support for clarity
| Customization: | Available |
|---|---|
| Color: | Grey |
| Type: | Simultaneous Interpretation System |
The DCP-AMS are the Hochiki America series of addressable manual pull stations that provide a fast and practical means of manually initiating a fire alarm signal. Both single action and dual action manual pull stations are available. Resetting of the pull station requires either a 1/8″ hex key.
99 in stock
Reviews
There are no reviews yet.