YBN-NSA4 Detector Base-asian-technologies-ltd
• UL & ULC Listed
• Designed for use with all NS analog sensors
• Available in 4 and 6 inch models
• Contains a security locking tab for tamper protection
The YBN-NSA-4 and HSB-NSA-6 are designed specifically
for use with the Hochiki NS Analog models AIEEA, ALG-V, ALK-V, ALK-D, ALN-V, ATG-EA, ATJ-EA and ACA-V.
The YBN-NSA-4 and HSB-NSA-6 common mounting bases allows for complete compatibility for all of the
Hochiki NS Series Analog sensors. The bases are lightweight and very thin, providing a low profile once
installed. The solder-less screw terminals enable quick and easy wiring connections
Related Products
Product Code: 0500-05890
The Hochiki HEH Series Horn
99 in stock
Reliable operation, even if the lens is contaminated by a film of oil, dust, water vapor or ice MOD. 016589
Bosch BCM-0000-B Battery Controller Module monitors the power supply of the fire panel and the charging of the batteries
- Make: Hochiki America
- Model code: ALN-V
- Type: Smoke
- Style: Photoelectric
- Hochiki America is a photoelectric smoke sensor with the following features: • Low profile – Only 2.00″ high, including base• Simple and reliable device addressing• Automatic compensation for sensor contamination• Built-in fire
| Material |
Plastic
|
| Usage/Application |
Office Buildings
|
| Power Source |
Electric
|
| Automation Grade |
Semi-Automatic
|
| Voltage |
24 V
|
| Frequency |
50 Hz
|
| Weight |
300 gm
|
| Model Number |
FAS-420
|
- High deceptive alarm immunity with intelligent signal processing LOGIC·SENS
- Innovative airflow monitoring including single-hole monitoring detects obstruction and breakage
- Initial set-up made easy by automatic initialization
- Maintains LSN loop functions in the event of wire interruption or short-circuit thanks to two integrated isolators
- SL-versions: Noise reduction to 38 dB(A) by extremely quiet fan and up to 34 dB(A) with additional sound absorber
Key Features
- Model: LBD0606/10
- Frequency: 150Hz -15KHz
- Input Voltage: 70V to 100V
- Material: Metal
- Weight: 750 g
100 in stock
Product Code: SCI (0400-01079)
The DCP-SCI short circuit isolator should be located between any devices on the SLC loop. In the event of a short on the SLC loop, the two adjacent isolators (closest isolators to the left and right of the shorted section) will activate and their respective LED indicators will be turned on. All devices between the active short circuit isolators will lose communication. This will prevent entire loop failure. Upon removal of the short condition, the DCP-SCIs will automatically restore the entire loop to the normal operating state.
STANDARD FEATURES
L@ti-View works with L@titude, FireNET and
FireNET Plus panels.
Reports configuration mismatch errors –
ensuring that the graphics system is properly
maintained and updated whenever there are
any panel configuration revisions
Powerful event log filtering and reporting
Manage the state of the fire system using a
combination of graphical images and system
controls
Programmable macro buttons to perform panel
control operations
Full map navigation using configurable buttons
or map areas
Device analog value reporting
Perform device and zone disablements /
enablements
Operate and restore loop output devices for
testing purposes
Dual screen support for clarity
- Integrated control unit
- Auto-Alignment with motorized detector head
- Light Cancellation Technology
- Building Movement Tracking
- Detection range up to 393 ft
- Extended monitoring area
- Transmitter, receiver, and evaluating unit integrated into a compact housing
- Electronic help for detector alignment and automatic detector calibration procedure
- Automatic compensation for contamination
- LED display in control unit for various operating states
- Adjustable alarm thresholds
75 in stock
The Hochiki PE series of power supplies is designed to provide the power and flexibility needed for the most demanding fire
system installations. The PE-10SN is a 10 Amp 24Vdc switch mode power supply design which is up to 50% more efficient than
linear mode supplies the PE series is your best choice for powering fire system notification appliances and accessories. New
and retrofit construction requirements for ADA compliance are easily accomplished with ample power for additional notification
appliances along with the ability to synchronize the notification appliances using built in sync generation for Potter, System
Sensor ®, Gentex® and Wheelock ® notification appliances. The PE series goes even further to make retrofits easier with the
advanced QuadraSync feature which allows notification appliances from different manufacturers to sync with each other. You
also have the option to monitor an existing circuit by placing a reference resistor of the same value on the power supply and
continuing to monitor the circuit without changing the field EOL.
SKU: DCP-DIMMCategories: Addressable, HOCHIKI, Modules
Reviews
There are no reviews yet.