The DCP-AMS are the Hochiki America series of addressable manual pull stations that provide a fast and practical means of manually initiating a fire alarm signal. Both single action and dual action manual pull stations are available. Resetting of the pull station requires either a 1/8″ hex key.
99 in stock
Product Code: SCI (0400-01079)
Analogue Addressable Smoke detector
Country of Origin: GERMANY
Categories: Addressable Fire Alarm System, Fire Alarm System, Smoke/Heart Detector
75 in stock
| Model | T-774HW |
| Power Taps @100V | 2.5W, 5W, 10W, 20W |
| Power Taps @70V | 1.25W, 2.5W, 5W, 10W, 20W |
| Transformer Impedance | 4KΩ/2KΩ/1KΩ/500Ω/250Ω |
| Input | 70V/100V/8Ω |
| SPL(1W/1M) | 86dB |
| Max. SPL (Rated W/1M) | 99dB |
| Frequency Response (-10dB) | 120-18KHz |
| Finish | Baffle: ABS, Black/White Grille: Steel, Black/White |
| Speaker Driver | 4″ x 1 1.5″ x 1 |
| Dimension | 260 x 170 x 170mm |
| Weight | 2.3kg |
| Mounting | With mounting bracket fixed by screw |
99 in stock
| Customization: | Available |
|---|---|
| Color: | Grey |
| Type: | Simultaneous Interpretation System |
Product Code: FN-4127-NIC (0100-03190)
Product Code: OTC2367
The T-6702 is a full-duplex network audio paging microphones, built-in one-way and two-way communication system. This paging microphone could be installed anywhere on the LAN system. The T-6702 network paging microphone has several paging modes include zone paging, group paging, all zone paging, two-way intercom, conference system, discussion system & voting system.
The T-6702 is built-in an LCD to display program status and its IP address, the end-user is accessible to change the IP setting with a password. It is built-in a 1W speaker with excellent sound clearance so as to ensure the communication is smooth and clear. This microphone design is adopted advanced technology to avoid echo noise and to avoid data delay as well.
65 in stock
Model TS-0310/ TS-0310A
Microphone type Electret condenser microphone
Microphone directivity Cardioid F
requency response 80Hz~16KHz
38 in stock
STANDARD FEATURES
L@ti-View works with L@titude, FireNET and
FireNET Plus panels.
Reports configuration mismatch errors –
ensuring that the graphics system is properly
maintained and updated whenever there are
any panel configuration revisions
Powerful event log filtering and reporting
Manage the state of the fire system using a
combination of graphical images and system
controls
Programmable macro buttons to perform panel
control operations
Full map navigation using configurable buttons
or map areas
Device analog value reporting
Perform device and zone disablements /
enablements
Operate and restore loop output devices for
testing purposes
Dual screen support for clarity
100 in stock
The Hochiki PE series of power supplies is designed to provide the power and flexibility needed for the most demanding fire
system installations. The PE-10SN is a 10 Amp 24Vdc switch mode power supply design which is up to 50% more efficient than
linear mode supplies the PE series is your best choice for powering fire system notification appliances and accessories. New
and retrofit construction requirements for ADA compliance are easily accomplished with ample power for additional notification
appliances along with the ability to synchronize the notification appliances using built in sync generation for Potter, System
Sensor ®, Gentex® and Wheelock ® notification appliances. The PE series goes even further to make retrofits easier with the
advanced QuadraSync feature which allows notification appliances from different manufacturers to sync with each other. You
also have the option to monitor an existing circuit by placing a reference resistor of the same value on the power supply and
continuing to monitor the circuit without changing the field EOL.
Reviews
There are no reviews yet.