TS-0370HD 16-channel Infrared Receiver Unit
| Customization: | Available |
|---|---|
| Color: | Grey |
| Type: | Simultaneous Interpretation System |
The infrared receiver unit adopts the latest electronic technology and uses special chips to ensure the best performance and longest battery lifespan. It is ergonomically designed and can receive infrared signals well. It has channel selection function and volume adjustment function, power switch control and battery power and signal indication functions. When the receiver cannot receive a signal for 5 minutes or the earphone is unplugged, it will automatically shut down.
Feature:
* In line with IEC61603-7.
* Full digital DQPSK digital demodulation technology.
* Adopt higher transmission frequency (2-6MHz, IEC61603 BAND4 frequency band), not interfered by high frequency driving light source.
* Push-button channel selection, support the reception of 16 audio channels.
* Support LCD display of channel number, battery power and signal status indication.
* The volume can be adjusted freely.
* No noise. When the signal is too low, the signal is automatically muted to ensure that users can only receive high-quality signals.
* Designed with an exquisite and smooth appearance; equipped with a lanyard to hang the receiver on the chest or put it in the pocket, which is convenient to use.
* Not limited by seats at the venue, the speaker can move around freely within the signal transmission range.
* Within the effective range of infrared radiation, the number of receiver units is not limited.
* When the receiver cannot receive a signal for 5 minutes or the earphone is unplugged, it will automatically shut down.
* Come with premium earphones.
* Support standardized demodulation, receive and demodulate standardized signals from other servers.
Specification:
| Model | TS-0370HD |
| Power supply | 3.7V 800mAh removable lithium battery |
| Demodulation mode | Full digital DQPSK digital demodulation technology |
| Carrier frequency | 2.0~6.0MHz |
| Frequency response | 120Hz~10kHz (standard) 20Hz~20kHz (high sound quality) |
| Maximum SNR | >80dB |
| Headphone load | 8-32Ω |
| Headphone volume | 40mW max |
| Headphone jack | 3.5mm mono jack |
| THD | <1% |
| Rated power | 100mW |
| Standby power | 8mW |
| Dimension (L×W×H) | 58×176×32mm |
| Weight | 0.11k |
Related Products
- Make: Hochiki America
- Model code: ALN-V
- Type: Smoke
- Style: Photoelectric
- Hochiki America is a photoelectric smoke sensor with the following features: • Low profile – Only 2.00″ high, including base• Simple and reliable device addressing• Automatic compensation for sensor contamination• Built-in fire
The Hochiki PE series of power supplies is designed to provide the power and flexibility needed for the most demanding fire
system installations. The PE-10SN is a 10 Amp 24Vdc switch mode power supply design which is up to 50% more efficient than
linear mode supplies the PE series is your best choice for powering fire system notification appliances and accessories. New
and retrofit construction requirements for ADA compliance are easily accomplished with ample power for additional notification
appliances along with the ability to synchronize the notification appliances using built in sync generation for Potter, System
Sensor ®, Gentex® and Wheelock ® notification appliances. The PE series goes even further to make retrofits easier with the
advanced QuadraSync feature which allows notification appliances from different manufacturers to sync with each other. You
also have the option to monitor an existing circuit by placing a reference resistor of the same value on the power supply and
continuing to monitor the circuit without changing the field EOL.
| Usage/Application |
Industrial
|
| Number of Zone |
10
|
| Material |
Sheet Metal
|
| Operating Voltage |
24 V DC
|
Categories: Hochiki, Module Input
Product Code: FRCME-M (0400-02580)
Tags: Fast Response Contact Monitoring Module FRCME-M, FRCME-M (0400-02580), Module Hochiki-FireNET
SKU: S758Category: Taktis Panels
Tags: fire alarm control panel, kentec taktis
Product Code: SCI (0400-01079)
The DCP-SCI short circuit isolator should be located between any devices on the SLC loop. In the event of a short on the SLC loop, the two adjacent isolators (closest isolators to the left and right of the shorted section) will activate and their respective LED indicators will be turned on. All devices between the active short circuit isolators will lose communication. This will prevent entire loop failure. Upon removal of the short condition, the DCP-SCIs will automatically restore the entire loop to the normal operating state.
Product Code: OTC2367
The T-6702 is a full-duplex network audio paging microphones, built-in one-way and two-way communication system. This paging microphone could be installed anywhere on the LAN system. The T-6702 network paging microphone has several paging modes include zone paging, group paging, all zone paging, two-way intercom, conference system, discussion system & voting system.
The T-6702 is built-in an LCD to display program status and its IP address, the end-user is accessible to change the IP setting with a password. It is built-in a 1W speaker with excellent sound clearance so as to ensure the communication is smooth and clear. This microphone design is adopted advanced technology to avoid echo noise and to avoid data delay as well.
65 in stock
| Material |
Plastic
|
| Usage/Application |
Office Buildings
|
| Power Source |
Electric
|
| Automation Grade |
Semi-Automatic
|
| Voltage |
24 V
|
| Frequency |
50 Hz
|
| Weight |
300 gm
|
| Model Number |
FAS-420
|
- High deceptive alarm immunity with intelligent signal processing LOGIC·SENS
- Innovative airflow monitoring including single-hole monitoring detects obstruction and breakage
- Initial set-up made easy by automatic initialization
- Maintains LSN loop functions in the event of wire interruption or short-circuit thanks to two integrated isolators
- SL-versions: Noise reduction to 38 dB(A) by extremely quiet fan and up to 34 dB(A) with additional sound absorber
STANDARD FEATURES
L@ti-View works with L@titude, FireNET and
FireNET Plus panels.
Reports configuration mismatch errors –
ensuring that the graphics system is properly
maintained and updated whenever there are
any panel configuration revisions
Powerful event log filtering and reporting
Manage the state of the fire system using a
combination of graphical images and system
controls
Programmable macro buttons to perform panel
control operations
Full map navigation using configurable buttons
or map areas
Device analog value reporting
Perform device and zone disablements /
enablements
Operate and restore loop output devices for
testing purposes
Dual screen support for clarity
ITC T-774H Wall Mount Loud Speaker Specs:
| Model | T-774HW |
| Power Taps @100V | 2.5W, 5W, 10W, 20W |
| Power Taps @70V | 1.25W, 2.5W, 5W, 10W, 20W |
| Transformer Impedance | 4KΩ/2KΩ/1KΩ/500Ω/250Ω |
| Input | 70V/100V/8Ω |
| SPL(1W/1M) | 86dB |
| Max. SPL (Rated W/1M) | 99dB |
| Frequency Response (-10dB) | 120-18KHz |
| Finish | Baffle: ABS, Black/White Grille: Steel, Black/White |
| Speaker Driver | 4″ x 1 1.5″ x 1 |
| Dimension | 260 x 170 x 170mm |
| Weight | 2.3kg |
| Mounting | With mounting bracket fixed by screw |
99 in stock
Reviews
There are no reviews yet.