Horn Strobe
Wheelock HSR-N | Fire Alarm Horn Strobe Light 12V / 24V (No lettering, Xenon Strobe)
The Wheelock Fire Alarm Horn Strobe Light 12V / 24V (No Lettering, Xenon Strobe) HSR-N Exceder is one of the best Wheelock fire alarms. The Exceder line provide superior sound penetration and high effiency strobe lights to minimize Current Draw.
All switches to change settings on the horn strobes can be set without the use of a tool and are located behind the Appliance to prevent tampering. Wall models feature Voltage test points to take readings with a Voltage meter for troubleshooting and AHJ inspection.
In a sleek, modern design, these fire alarm horn strobes offer a comprehensive feature set, including an industry first of 8 Candela Settings on one Appliance, 3 sound settings, and universal Mounting base.
Wheelock – HSR-N – Features
- Field selectable Candela Settings
- Wall: 15/1575/30/75/95/110/135/185
- Compliance & Approvals
- UL, ULC, FM, CSFM
- Low profile designMultiple audible settings
- 90, 95, 99
- Easy to install
- Prewire capability to check for wiring & ground faults prior to Appliance installation
- Contact cover not only provides protection from dirt, dust, paint and accidental damage, it allows for prewire testing and troubleshooting
Wheelock – HSR-N – Specifications
| Catalog Number | HSR-AL |
| Product Length/Depth | 2.2 in |
| Product Height | 5.24 in |
| Product Width | 4.56 in |
| Product Weight | .546 lb |
| Mounting Method | Wall |
| Housing Color | Red |
| Indoor/Outdoor | Indoor |
| Housing Material | Plastic |
| Lettering | No Lettering |
| Operating Temperature | 32°F to 120°F (0°C to 49°C) |
| Compliance And Standards | ULC, CSFM, UL, FM |
| Lamp Type | Xenon |
| Lens Color | Clear |
| Candela Settings | 15 cd, 1575 cd, 30 cd, 75 cd, 95 cd, 110 cd, 135 cd, 185 cd |
| Current Draw (DC) | 0.082/0.095/0.102/0.148/0.176/ 0.197/0.242/ 0.282 |
| Lens Material | Lexan |
| Sound Level (DBA) | 99, 90, 95 |
| Tones | Continuous Horn or Temporal (Code 3) |
Related Products
Analogue Addressable Smoke detector
Country of Origin: GERMANY
Categories: Addressable Fire Alarm System, Fire Alarm System, Smoke/Heart Detector
Product Code: SCI (0400-01079)
The DCP-SCI short circuit isolator should be located between any devices on the SLC loop. In the event of a short on the SLC loop, the two adjacent isolators (closest isolators to the left and right of the shorted section) will activate and their respective LED indicators will be turned on. All devices between the active short circuit isolators will lose communication. This will prevent entire loop failure. Upon removal of the short condition, the DCP-SCIs will automatically restore the entire loop to the normal operating state.
• UL & ULC Listed
• Designed for use with all NS analog sensors
• Available in 4 and 6 inch models
• Contains a security locking tab for tamper protection
Product Code: 0500-06100
TheHochiki HCC Series Horn Strobe
89 in stock
Product Code: 0200-03460
The Hochiki SPC-24 Projected Beam Smoke Detector consists of an emitter and receiver. The SPC-24 detector should be placed so that smoke generated by a fire will likely rise into the path of the beam. The receiver is constantly monitoring and measuring the intensity of the beam transmitted by the emitter. Should the smoke from a fire cause a decrease in the signal strength of a magnitude that exceeds the programmed obscuration setting, an alarm signal is generated.
Model TS-0310/ TS-0310A
Microphone type Electret condenser microphone
Microphone directivity Cardioid
Frequency response 80Hz~16KHz
99 in stock
Categories: Hochiki, Module Input
Product Code: FRCME-M (0400-02580)
Tags: Fast Response Contact Monitoring Module FRCME-M, FRCME-M (0400-02580), Module Hochiki-FireNET
Bosch BCM-0000-B Battery Controller Module monitors the power supply of the fire panel and the charging of the batteries
- Integrated control unit
- Auto-Alignment with motorized detector head
- Light Cancellation Technology
- Building Movement Tracking
- Detection range up to 393 ft
- • UL & ULC Listed
• Designed for use with all NS analog sensors
• Available in 4 and 6 inch models
• Contains a security locking tab for tamper protection
SKU: S758Category: Taktis Panels
Tags: fire alarm control panel, kentec taktis
Reviews
There are no reviews yet.