DIMM – Dual Input Monitor Module for 4- Box, Class B-asian-technologies-ltd
SKU: DCP-DIMMCategories: Addressable, HOCHIKI, Modules
• UL 864 9th Edition Listed
• Fast, reliable contact monitoring utilizing the Hochiki DCP (Digital Communications Protocol)
• 127 devices can be used per DCP loop
• Bi-colored indicating LED provides module status
• Dual input contact monitor
• Can be programmed to monitor Normally Open (NO) or Normally Closed (NC) contacts
• Operates on Class A or Class B SLC loop
• Accepts up to 14 AWG wire
Related Products
- Integrated control unit
- Auto-Alignment with motorized detector head
- Light Cancellation Technology
- Building Movement Tracking
- Detection range up to 393 ft
| Material |
Plastic
|
| Usage/Application |
Office Buildings
|
| Power Source |
Electric
|
| Automation Grade |
Semi-Automatic
|
| Voltage |
24 V
|
| Frequency |
50 Hz
|
| Weight |
300 gm
|
| Model Number |
FAS-420
|
- High deceptive alarm immunity with intelligent signal processing LOGIC·SENS
- Innovative airflow monitoring including single-hole monitoring detects obstruction and breakage
- Initial set-up made easy by automatic initialization
- Maintains LSN loop functions in the event of wire interruption or short-circuit thanks to two integrated isolators
- SL-versions: Noise reduction to 38 dB(A) by extremely quiet fan and up to 34 dB(A) with additional sound absorber
Product Code: 0200-03460
The Hochiki SPC-24 Projected Beam Smoke Detector consists of an emitter and receiver. The SPC-24 detector should be placed so that smoke generated by a fire will likely rise into the path of the beam. The receiver is constantly monitoring and measuring the intensity of the beam transmitted by the emitter. Should the smoke from a fire cause a decrease in the signal strength of a magnitude that exceeds the programmed obscuration setting, an alarm signal is generated.
Bosch BCM-0000-B Battery Controller Module monitors the power supply of the fire panel and the charging of the batteries
The Hochiki PE series of power supplies is designed to provide the power and flexibility needed for the most demanding fire
system installations. The PE-10SN is a 10 Amp 24Vdc switch mode power supply design which is up to 50% more efficient than
linear mode supplies the PE series is your best choice for powering fire system notification appliances and accessories. New
and retrofit construction requirements for ADA compliance are easily accomplished with ample power for additional notification
appliances along with the ability to synchronize the notification appliances using built in sync generation for Potter, System
Sensor ®, Gentex® and Wheelock ® notification appliances. The PE series goes even further to make retrofits easier with the
advanced QuadraSync feature which allows notification appliances from different manufacturers to sync with each other. You
also have the option to monitor an existing circuit by placing a reference resistor of the same value on the power supply and
continuing to monitor the circuit without changing the field EOL.
100 in stock
Product Code: 0500-06100
TheHochiki HCC Series Horn Strobe
89 in stock
Analogue Addressable Smoke detector
Country of Origin: GERMANY
Categories: Addressable Fire Alarm System, Fire Alarm System, Smoke/Heart Detector
- Extended monitoring area
- Transmitter, receiver, and evaluating unit integrated into a compact housing
- Electronic help for detector alignment and automatic detector calibration procedure
- Automatic compensation for contamination
- LED display in control unit for various operating states
- Adjustable alarm thresholds
75 in stock
STANDARD FEATURES
Low profile – only 2.00″ high, including base
Simple and reliable device addressing method
Uses the noise immune Digital Communication
Protocol (DCP), which utilizes interrupts for fast
response to fires
Rate of rise temperature threshold = 15°F/Min
(determined by panel)
Adjustable threshold temperature = 135°F – 190°F
(determined by panel)
UL maximum spacing of 70 feet
Reviews
There are no reviews yet.