Dual SLC Panel Module-S758_asian-technologies-ltd
SKU: S758Category: Taktis Panels
Tags: fire alarm control panel, kentec taktis
Dual Loop Panel Module
The Dual Loop Panel Module provides two supervised loop functions for the fire alarm control panel. All models of the Taktis Fire Alarm Control Panel contain at least one Dual Loop Panel Module.
The Dual Loop Panel Module monitors loop device status and provides status to the panel processor. It holds device configurations and operates in a standalone manner when catastrophic failures occur. The Dual Loop Panel Modules can be connected in any available slot (C-K) on the Main Back Board to provide this operating function.
Each Dual Loop Panel Module can support either Hochiki or Apollo protocols.
Product code : S758
Technical information
- Supply Voltage 24 V DC
- Loop Voltage Range 25 – 38 V DC
- Maximum Loop Current 400 mA
- Maximum Current Consumption 1.5 A
- Protocol(s) Supported Hochiki
- Temperature Range -5oC – 49oC or 23oF – 120oF
- Relative Humidity Up to 95%, non-condensing
Related Products
Model TS-0310/ TS-0310A
Microphone type Electret condenser microphone
Microphone directivity Cardioid F
requency response 80Hz~16KHz
38 in stock
- Extended monitoring area
- Transmitter, receiver, and evaluating unit integrated into a compact housing
- Electronic help for detector alignment and automatic detector calibration procedure
- Automatic compensation for contamination
- LED display in control unit for various operating states
- Adjustable alarm thresholds
75 in stock
| Material |
Plastic
|
| Usage/Application |
Office Buildings
|
| Power Source |
Electric
|
| Automation Grade |
Semi-Automatic
|
| Voltage |
24 V
|
| Frequency |
50 Hz
|
| Weight |
300 gm
|
| Model Number |
FAS-420
|
- High deceptive alarm immunity with intelligent signal processing LOGIC·SENS
- Innovative airflow monitoring including single-hole monitoring detects obstruction and breakage
- Initial set-up made easy by automatic initialization
- Maintains LSN loop functions in the event of wire interruption or short-circuit thanks to two integrated isolators
- SL-versions: Noise reduction to 38 dB(A) by extremely quiet fan and up to 34 dB(A) with additional sound absorber
Product Code: OTC2367
The T-6702 is a full-duplex network audio paging microphones, built-in one-way and two-way communication system. This paging microphone could be installed anywhere on the LAN system. The T-6702 network paging microphone has several paging modes include zone paging, group paging, all zone paging, two-way intercom, conference system, discussion system & voting system.
The T-6702 is built-in an LCD to display program status and its IP address, the end-user is accessible to change the IP setting with a password. It is built-in a 1W speaker with excellent sound clearance so as to ensure the communication is smooth and clear. This microphone design is adopted advanced technology to avoid echo noise and to avoid data delay as well.
65 in stock
| Usage/Application |
Industrial
|
| Number of Zone |
10
|
| Material |
Sheet Metal
|
| Operating Voltage |
24 V DC
|
- • UL & ULC Listed
• Designed for use with all NS analog sensors
• Available in 4 and 6 inch models
• Contains a security locking tab for tamper protection
Bosch BCM-0000-B Battery Controller Module monitors the power supply of the fire panel and the charging of the batteries
Reliable operation, even if the lens is contaminated by a film of oil, dust, water vapor or ice MOD. 016589
- Integrated control unit
- Auto-Alignment with motorized detector head
- Light Cancellation Technology
- Building Movement Tracking
- Detection range up to 393 ft
100 in stock
Reviews
There are no reviews yet.