Wall mount speaker
ITC T-774H Wall Mount Loud Speaker Specs:
| Model | T-774HW |
| Power Taps @100V | 2.5W, 5W, 10W, 20W |
| Power Taps @70V | 1.25W, 2.5W, 5W, 10W, 20W |
| Transformer Impedance | 4KΩ/2KΩ/1KΩ/500Ω/250Ω |
| Input | 70V/100V/8Ω |
| SPL(1W/1M) | 86dB |
| Max. SPL (Rated W/1M) | 99dB |
| Frequency Response (-10dB) | 120-18KHz |
| Finish | Baffle: ABS, Black/White Grille: Steel, Black/White |
| Speaker Driver | 4″ x 1 1.5″ x 1 |
| Dimension | 260 x 170 x 170mm |
| Weight | 2.3kg |
| Mounting | With mounting bracket fixed by screw |
ITC T-774H Wall Mount Loud Speaker built-in 70V/100V transformer. The 70V/100V transformer technique reduces line losses on a longer distance and allows easy parallel connection of multiple speakers.
The built-in 4″ + 1.5″ 2.0 speaker driver is designed for wide frequency response 120-18kHz, the multiple power taps 2.5W, 5W, 10W & 20W are helpful for different applications varies from room size and ambient noise surrounding. The metal grille, ABS enclosure, and stainless mounting bracket are of black/ white color. Easy and secure wall mount installation through the supplied mounting bracket.
Related Products
SKU: S758Category: Taktis Panels
Tags: fire alarm control panel, kentec taktis
Key Features
- Model: LBD0606/10
- Frequency: 150Hz -15KHz
- Input Voltage: 70V to 100V
- Material: Metal
- Weight: 750 g
100 in stock
Model TS-0310/ TS-0310A
Microphone type Electret condenser microphone
Microphone directivity Cardioid F
requency response 80Hz~16KHz
38 in stock
STANDARD FEATURES
Low profile – only 2.00″ high, including base
Simple and reliable device addressing method
Uses the noise immune Digital Communication
Protocol (DCP), which utilizes interrupts for fast
response to fires
Rate of rise temperature threshold = 15°F/Min
(determined by panel)
Adjustable threshold temperature = 135°F – 190°F
(determined by panel)
UL maximum spacing of 70 feet
Product Code: FN-4127-NIC (0100-03190)
Product Code: SCI (0400-01079)
The DCP-SCI short circuit isolator should be located between any devices on the SLC loop. In the event of a short on the SLC loop, the two adjacent isolators (closest isolators to the left and right of the shorted section) will activate and their respective LED indicators will be turned on. All devices between the active short circuit isolators will lose communication. This will prevent entire loop failure. Upon removal of the short condition, the DCP-SCIs will automatically restore the entire loop to the normal operating state.
SKU: DCP-DIMMCategories: Addressable, HOCHIKI, Modules
Product Code: OTC2367
The T-6702 is a full-duplex network audio paging microphones, built-in one-way and two-way communication system. This paging microphone could be installed anywhere on the LAN system. The T-6702 network paging microphone has several paging modes include zone paging, group paging, all zone paging, two-way intercom, conference system, discussion system & voting system.
The T-6702 is built-in an LCD to display program status and its IP address, the end-user is accessible to change the IP setting with a password. It is built-in a 1W speaker with excellent sound clearance so as to ensure the communication is smooth and clear. This microphone design is adopted advanced technology to avoid echo noise and to avoid data delay as well.
65 in stock
Product Code: 0500-06100
TheHochiki HCC Series Horn Strobe
89 in stock
The Hochiki PE series of power supplies is designed to provide the power and flexibility needed for the most demanding fire
system installations. The PE-10SN is a 10 Amp 24Vdc switch mode power supply design which is up to 50% more efficient than
linear mode supplies the PE series is your best choice for powering fire system notification appliances and accessories. New
and retrofit construction requirements for ADA compliance are easily accomplished with ample power for additional notification
appliances along with the ability to synchronize the notification appliances using built in sync generation for Potter, System
Sensor ®, Gentex® and Wheelock ® notification appliances. The PE series goes even further to make retrofits easier with the
advanced QuadraSync feature which allows notification appliances from different manufacturers to sync with each other. You
also have the option to monitor an existing circuit by placing a reference resistor of the same value on the power supply and
continuing to monitor the circuit without changing the field EOL.
Reviews
There are no reviews yet.