High-performance IR Radiator
The IR radiator is a high-power IR device, used to receive the carrier signal from the IR transmitting controller, and transmit the carrier signal through infrared rays. It supports hand-in-hand connection mode, and up to 30 radiating panels can be connected at the same time.
Feature:
* Strong signal transmitting ability, the maximum distance can reach 25 meters; realize 500 meters transmission distance after cascading.
* Transmitting angle: 135°.
* Cable delay compensation functions.
* The standby function: the IR radiator will enter into standby status when there is no signal received, or there is no signal output from the controller. The standby power is 3W.
* The radiation intensity can reduce by half. Reduce signal power, easy to use in small spaces.
* The arc structure enables large radiation angle and wide radiation coverage.
Specification:
| Model | TS-0370HS | ||||||||||||||||||||||||||
| Input voltage | 100V-240V 50/60Hz | ||||||||||||||||||||||||||
| Rated power | 36W | ||||||||||||||||||||||||||
| Frequency range | 2MHz~6MHz | ||||||||||||||||||||||||||
| IR radiant power | 33W | ||||||||||||||||||||||||||
| RF output impedance | 75Ω | ||||||||||||||||||||||||||
| RF input | 100mV-3V 10KΩ | ||||||||||||||||||||||||||
| Gain control | AGC automatic gain control | ||||||||||||||||||||||||||
| Automatic threshold control | 100mV RF signal start | ||||||||||||||||||||||||||
| Standby power consumption | 3W | ||||||||||||||||||||||||||
| Color | Black | ||||||||||||||||||||||||||
| Dimension | 478×228×208mm (L×W×H) | ||||||||||||||||||||||||||
| Weight | 5.3Kg
The IR radiator is a high-power IR device, used to receive the carrier signal from the IR transmitting controller, and transmit the carrier signal through infrared rays. It supports hand-in-hand connection mode, and up to 30 radiating panels can be connected at the same time. Feature: * Strong signal transmitting ability, the maximum distance can reach 25 meters; realize 500 meters transmission distance after cascading. * Transmitting angle: 135°. * Cable delay compensation functions. * The standby function: the IR radiator will enter into standby status when there is no signal received, or there is no signal output from the controller. The standby power is 3W. * The radiation intensity can reduce by half. Reduce signal power, easy to use in small spaces. * The arc structure enables large radiation angle and wide radiation coverage. Specification:
|
Related Products
Reliable operation, even if the lens is contaminated by a film of oil, dust, water vapor or ice MOD. 016589
| Material |
Plastic
|
| Usage/Application |
Office Buildings
|
| Power Source |
Electric
|
| Automation Grade |
Semi-Automatic
|
| Voltage |
24 V
|
| Frequency |
50 Hz
|
| Weight |
300 gm
|
| Model Number |
FAS-420
|
- High deceptive alarm immunity with intelligent signal processing LOGIC·SENS
- Innovative airflow monitoring including single-hole monitoring detects obstruction and breakage
- Initial set-up made easy by automatic initialization
- Maintains LSN loop functions in the event of wire interruption or short-circuit thanks to two integrated isolators
- SL-versions: Noise reduction to 38 dB(A) by extremely quiet fan and up to 34 dB(A) with additional sound absorber
STANDARD FEATURES
L@ti-View works with L@titude, FireNET and
FireNET Plus panels.
Reports configuration mismatch errors –
ensuring that the graphics system is properly
maintained and updated whenever there are
any panel configuration revisions
Powerful event log filtering and reporting
Manage the state of the fire system using a
combination of graphical images and system
controls
Programmable macro buttons to perform panel
control operations
Full map navigation using configurable buttons
or map areas
Device analog value reporting
Perform device and zone disablements /
enablements
Operate and restore loop output devices for
testing purposes
Dual screen support for clarity
The Hochiki PE series of power supplies is designed to provide the power and flexibility needed for the most demanding fire
system installations. The PE-10SN is a 10 Amp 24Vdc switch mode power supply design which is up to 50% more efficient than
linear mode supplies the PE series is your best choice for powering fire system notification appliances and accessories. New
and retrofit construction requirements for ADA compliance are easily accomplished with ample power for additional notification
appliances along with the ability to synchronize the notification appliances using built in sync generation for Potter, System
Sensor ®, Gentex® and Wheelock ® notification appliances. The PE series goes even further to make retrofits easier with the
advanced QuadraSync feature which allows notification appliances from different manufacturers to sync with each other. You
also have the option to monitor an existing circuit by placing a reference resistor of the same value on the power supply and
continuing to monitor the circuit without changing the field EOL.
| Customization: | Available |
|---|---|
| Color: | Grey |
| Type: | Simultaneous Interpretation System |
Key Features
- Model: LBD0606/10
- Frequency: 150Hz -15KHz
- Input Voltage: 70V to 100V
- Material: Metal
- Weight: 750 g
100 in stock
- Integrated control unit
- Auto-Alignment with motorized detector head
- Light Cancellation Technology
- Building Movement Tracking
- Detection range up to 393 ft
- • UL & ULC Listed
• Designed for use with all NS analog sensors
• Available in 4 and 6 inch models
• Contains a security locking tab for tamper protection
100 in stock
Product Code: 0500-05890
The Hochiki HEH Series Horn
99 in stock
Product Code: FN-4127-NIC (0100-03190)
SKU: DCP-DIMMCategories: Addressable, HOCHIKI, Modules
Reviews
There are no reviews yet.