FN-4127-NIC – Network Interface Card for FireNET® & FireNET®Plus -asian-technologies-ltd
Product Code: FN-4127-NIC (0100-03190)
| Hochiki FireNET® & FireNET® Plus | FN-4127-NIC Network Interface Card | |||||||
| Supply Voltage | 24 VDC Nominal | |||||||
| Quiescent Current Consumption | 40mA | |||||||
| Cable Length |
4,000ft Max.
|
|||||||
| Cable Type |
Belden 9271, Belden 9860
|
|||||||
| Protocol |
RS-485
|
|||||||
| Address Setting |
Dipswitch
|
|||||||
| Operating Temperature |
32F~120F
|
|||||||
| Operating Humidity |
90%RH
|
|||||||
• Allows for the expansion of up to 64 panels on a FireNET system
• Enables information to be transmitted between control panels
• Network protocol designed for tolerance to interference and data corruption
• Each card configured to a unique address through use of a dipswitch
• Transmission distance of up to 4,000 ft.
• Uses standard type Belden cable suitable for RS-485 applications
• Simple 2-wire loop connection
• Flexible configuration options
• Network wide Cause & Effect logic
• Fully secure against short or open conditions
• UL 864 Listed – S8255
• FM Approved – 3033817
• CSFM Listed – 7165-0410:0159
• NYC Approved – COA# 6171
Related Products
- • UL & ULC Listed
• Designed for use with all NS analog sensors
• Available in 4 and 6 inch models
• Contains a security locking tab for tamper protection
Product Code: SCI (0400-01079)
The DCP-SCI short circuit isolator should be located between any devices on the SLC loop. In the event of a short on the SLC loop, the two adjacent isolators (closest isolators to the left and right of the shorted section) will activate and their respective LED indicators will be turned on. All devices between the active short circuit isolators will lose communication. This will prevent entire loop failure. Upon removal of the short condition, the DCP-SCIs will automatically restore the entire loop to the normal operating state.
Reliable operation, even if the lens is contaminated by a film of oil, dust, water vapor or ice MOD. 016589
Categories: Hochiki, Module Input
Product Code: FRCME-M (0400-02580)
Tags: Fast Response Contact Monitoring Module FRCME-M, FRCME-M (0400-02580), Module Hochiki-FireNET
Product Code: 0200-03460
The Hochiki SPC-24 Projected Beam Smoke Detector consists of an emitter and receiver. The SPC-24 detector should be placed so that smoke generated by a fire will likely rise into the path of the beam. The receiver is constantly monitoring and measuring the intensity of the beam transmitted by the emitter. Should the smoke from a fire cause a decrease in the signal strength of a magnitude that exceeds the programmed obscuration setting, an alarm signal is generated.
100 in stock
- Integrated control unit
- Auto-Alignment with motorized detector head
- Light Cancellation Technology
- Building Movement Tracking
- Detection range up to 393 ft
Analogue Addressable Smoke detector
Country of Origin: GERMANY
Categories: Addressable Fire Alarm System, Fire Alarm System, Smoke/Heart Detector
Model TS-0310/ TS-0310A
Microphone type Electret condenser microphone
Microphone directivity Cardioid
Frequency response 80Hz~16KHz
99 in stock
Product Code: 0500-06100
TheHochiki HCC Series Horn Strobe
89 in stock
Reviews
There are no reviews yet.